22+ WRX Rear Reflector Overlay

OEM 22+ Subaru WRXs come with rear bumper reflectors that stick out next to the matte black of the bumper. These overlays allow you to mask that reflector giving the rear of your car a much more clean and sleek appearance while still allowing the light to shine through so that the reflector works as intended.

These overlays are designed and cut in-house using high-quality vinyl to ensure proper fit and finish.

Color Options

• Dark Smoke - Completely blacks out the reflector while still allowing light to shine through so the reflector works as intended.

• Light Smoke - Gives the reflector more of a dark cherry red instead of a vibrant red appearance.

• Dark Stealth - Similar to the Dark Smoke but has a matte finish to it to blend in more with the black plastic of the bumper.

Installation Instructions for DARK SMOKE, LIGHT SMOKE & DARK STEALTH (Dry Application)

• Prior to applying the overlay, make sure the surface is thoroughly cleaned and dry.

• Carefully peel the overlay off of the backing and use the inner corner edge of the reflector to line it up and then slowly follow the top edge until you get to the outer side.

• When you have the overlay installed on the face of the sidemarker you can then wrap the back edge around the curve making sure not to leave an edges lifted.

• Once you have successfully positioned the overlay where you want it, use a vinyl squeegee or microfiber to remove any air bubbles.

• We recommend allowing at least 48hrs before washing the car to allow for the adhesive to cure and avoid directly spraying them with a pressure washer.

• The temperature needs to be a minimum of 65°F for proper application.