Driven.Media Carbon Fiber Steering Wheel Trim - 2022+ Toyota GR86 / Subaru BRZ

Prior to installing the carbon fiber cover, make sure the surface is thoroughly cleaned and dry.

Due to this piece contouring the trim around the airbag completely, the airbag needs to be temporarily popped out of the steering wheel.

Using a plastic pry tool, pry off the two covers on both sides of the steering wheel backing. This will reveal three metal spring clips that are holding the airbag in place.

Carefully use a long flathead screwdriver to push the ends of the spring clips to release the airbag. It does not need to be completely removed. Once it’s popped out, that gives you enough room to install the carbon fiber cover.

Carefully peel the backing off of the double sided tape on the back of the cover.

Place the cover into position and press it onto the OEM unit applying constant pressure for at least 30 seconds.

The recommended ambient temperature for install is 70°F - 90°F to ensure proper adhesion.

Confirmed Vehichle Fitment for Driven.Media 22+ GR86/BRZ Carbon Fiber Steering Wheel Trim

• 2022-2025 Toyota GR86
• 2022-2025 Subaru BRZ