OVERTAKE Wheel Spacers 3mm & 5mm - Pair - 5x114.3 / 5x100 Subaru Fitment

The OVERTAKE 3mm or 6mm Subaru Wheel Spacers are a simple way to fine-tune wheel fitment, add a cleaner stance, and gain a little extra clearance for brakes or aftermarket calipers. Each spacer pushes the wheel outward by 3mm per side, helping reduce the sunken-in factory look without dramatically changing the car’s overall setup.

Made from 6061 aluminum with an anodized finish, these spacers are drilled for both 5x114.3 and 5x100 Subaru bolt patterns. The hub-centric 56.1mm bore helps keep the wheel centered on the factory hub for a smooth, vibration-free install when properly fitted and torqued.

Overtake Install + Overview

Key Features

• 3mm & 6mm Spacer Thickness: Pushes each wheel outward 3mm or 6mm for a cleaner, more intentional stance.
• Dual Bolt Pattern Design: Drilled for both 5x114.3 and 5x100 Subaru applications.
• 6061 Aluminum Construction: Lightweight and durable spacer design built for long-term use.
• Anodized Finish: Helps resist corrosion and keeps the spacers looking clean.
• Hub-Centric 56.1mm Bore: Centers on the factory Subaru hub to help prevent vibration.
• Slip-On Installation: Slides over the factory hub and reuses existing wheel studs.
• Chamfered Edges: Chamfered lips on both the hub and wheel side make installation easier.
• Laser-Etched Specs: Spacer specs are etched directly onto the part for easy identification.
• Sold as a Pair: Includes two spacers. Order two pairs for a full vehicle set.

Why We Like It

These spacers are perfect when your wheels are close, but not quite where you want them. A 3mm spacer is subtle enough to keep the car looking clean while helping with stance, brake clearance, and wheel fitment. The dual bolt pattern also makes them especially useful across Subaru platforms, whether you are working with 5x100 or 5x114.3 hubs.

What You’ll Notice

• Wheels sitting slightly more flush with the fenders
• A wider track from pushing each wheel out 3mm per side
• Additional clearance for bigger brakes or aftermarket calipers
• A cleaner stance without changing ride height
• A reversible fitment adjustment that can be removed at any time

Confirmed Fitment

• 2002–2026 Subaru WRX
• 2004–2021 Subaru STI
• 1998–2026 Subaru Forester
• 1993–2026 Subaru Impreza
• 2000–2026 Subaru Outback
• 1991–2025 Subaru Legacy
• 2013–2026 Subaru Crosstrek
• 2019–2026 Subaru Ascent

Specifications

• Brand: OVERTAKE
• Product: Wheel Spacers
• Thickness: 3mm & 6mm
• Bolt Pattern: 5x114.3 / 5x100
• Center Bore: 56.1mm
• Material: 6061 aluminum
• Finish: Anodized
• Design: Slip-on spacer
• Quantity: Pair, two spacers

Installation Notes

• Remove the wheels and clean the hub mounting surface before installation.
• Seat each spacer fully against the factory hub.
• Reinstall wheels and torque lug nuts to factory specification.
• Verify proper thread engagement before driving.
• Re-torque lug nuts after initial driving.
• Order two pairs if installing spacers on all four corners.

What’s in the Box

• (2) OVERTAKE 3mm Wheel Spacers

Compatibility & Disclaimers

Sold as a pair. Order two pairs for a full vehicle set. Designed for compatible Subaru applications using a 56.1mm center bore and either 5x114.3 or 5x100 bolt pattern. Always verify bolt pattern, center bore, wheel clearance, brake clearance, and proper wheel stud thread engagement before installation. Wheel fitment results may vary depending on wheel size, offset, brake setup, suspension setup, tire size, and ride height.